Lane line ropes are secured to level deck pools by means of a holdfast threaded socket grouted in the pool surround and a deck level adaptor plate secured to the holdfast and extending the pool edge where the lane line is secured to the ring on the plate.

On a standard pool with water below the pool surround, the holdfast fixing is grouted into the rear of the scum channel or to the pool wall where skimmers replace the channel, and and eybolt is screwed into the holdfast. The lane line is then attached to the eyebolt.

Due to extreme tension place upon the holdfast, they must be grouted using an epoxy resin. An alternative fixing on the standard pool where the scum channel or wall can not be drilled, is by the holdfast being grouted to the pool surround and the right angled bracket being fastened over the poolside and down to the water level. See illustration

S295 - Anti-Turbulence (illustrated)
Stainless steel construction to take lines and floats. Will carry 5 x 25 metre lines, castor's with brake and non-marking tyres, for ease of movement and storage.

S297 - Wall Mounted Reel (not illustrated)

Similar to S295 but bolts to wall to leave poolside clear.

S296 - Individual Lane Line Storage Reel (illustrated)

S293 - Training Lane Line Trolly (not illustrated)

Takes 5 x 25 metre ropes with floats, stainless steel construction on castors for ease of movement.

S321 Holdfast for grouting to pool side. (illustraded)

S351 Eyebolt (illustrated)

S241 - Wall Brackets for Lane Lines
Wall brackets for training lane lines S241 are available.

S360 Training Lane Line

S320 Lane Rope Fixings with recessed head

S361  Anti-Turbulence Lane Line

S322 Cup Anchor fro grouting to pool side

S323 Claw Hook - Only to be used with training lane lines. Hooks over 38mm dia tube poolside rails.

S355 Deck Level Adapter, extends lane line fixing to edge of pool from the deck fixing.